Canada - A/T - U660E Compensation Code Input Process
BulletinTSB2271
Issue Date
November 17, 2006
Title
U660E AUTOMATIC TRANSAXLE COMPENSATION CODE INPUT PROCESS
Component
AUTOMATIC TRANSAXLE
Models
'07 ES 350
INTRODUCTION:
2007 model year ES 350 vehicles are equipped with a U660E (6-speed) transaxle. These transaxles are tested and marked with an automatic transaxle compensation value to improve drivability and reduce the amount of time needed to complete the Transmission Control Module (TCM) "Learning" process.
CAUTION:
The transaxle compensation value registration process MUST be performed anytime one of the following components are replaced:
- Transaxle
- Transmission Control Module (TCM)
Failure to follow the procedure below may lengthen the time to complete the TCM "Learning" process, potentially resulting in performance concerns.
APPLICABLE VEHICLES:
- 2007 model year ES 350 vehicles equipped with the U660E (6-speed) automatic transaxle.
REQUIRED SSTs:
WARRANTY INFORMATION:
REGISTRATION PROCEDURE:
Refer to ETAS, 2007 model year ES 350 Repair Manual: U660E Automatic Transaxle: Automatic Transaxle System: Manual Shifting Test, Registration.
NOTE:
If the transaxle is installed in the vehicle and the QR Code Label cannot be read, it may be necessary to remove the battery and battery tray to access the QR Code Label.
LETTER INPUT CHART: