Control Module HVAC: Service and Repair

Air Conditioning Amplifier:

AIR CONDITIONING AMPLIFIER

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. REMOVE FRONT DOOR SCUFF PLATE RH
3. REMOVE FRONT DOOR OPENING TRIM COVER RH
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. REMOVE SIDE INSTRUMENT PANEL RH
6. REMOVE FRONT PASSENGER SIDE KNEE AIR BAG ASSEMBLY
7. REMOVE LOWER INSTRUMENT PANEL RH

8. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY




a. Disconnect the 3 connectors.
b. Remove the 2 bolts and air conditioning amplifier assembly.

INSTALLATION

1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY




a. Install the air conditioning amplifier assembly with the 2 bolts.
b. Connect the 3 connectors.

2. INSTALL LOWER INSTRUMENT PANEL RH
3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
4. INSTALL SIDE INSTRUMENT PANEL RH
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
6. INSTALL FRONT DOOR OPENING TRIM COVER RH
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

11. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.

12. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the negative battery terminal.