Ambient Light Sensor: Service and Repair

Automatic Light Control Sensor:

AUTOMATIC LIGHT CONTROL SENSOR

REMOVAL

1. PRECAUTION

CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing.

2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER
6. REMOVE STEERING PAD
7. REMOVE STEERING WHEEL ASSEMBLY
8. REMOVE FRONT DOOR SCUFF PLATE LH
9. REMOVE FRONT DOOR OPENING TRIM COVER LH
10. REMOVE SIDE INSTRUMENT PANEL LH
11. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
13. REMOVE STEERING COLUMN COVER
14. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE
15. REMOVE TILT & TELESCOPIC SWITCH
16. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
17. REMOVE COMBINATION METER ASSEMBLY
18. REMOVE NO. 1 SWITCH HOLE BASE
19. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
20. REMOVE FRONT DOOR SCUFF PLATE RH
21. REMOVE FRONT DOOR OPENING TRIM COVER RH
22. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
23. REMOVE SIDE INSTRUMENT PANEL RH
24. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
25. REMOVE LOWER INSTRUMENT PANEL RH
26. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
27. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
28. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
29. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
30. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
31. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
32. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
33. REMOVE CONSOLE BOX POCKET
34. REMOVE CONSOLE BOX CARPET
35. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
36. REMOVE REAR CONSOLE BOX ASSEMBLY
37. REMOVE FRONT PILLAR GARNISH LH
38. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
39. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)
40. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
41. REMOVE FRONT PILLAR GARNISH RH
42. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
43. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)
44. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
45. REMOVE NO. 1 SPEAKER HOLE COVER
46. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
47. REMOVE NO. 1 INSTRUMENT PANEL MOUNTING BRACKET
48. REMOVE PUSH START SWITCH
49. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY
50. REMOVE ROOM TEMPERATURE SENSOR
51. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player)
52. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player)
53. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
54. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
55. REMOVE DEFROSTER NOZZLE ASSEMBLY
56. REMOVE NO. 1 HEATER TO REGISTER DUCT
57. REMOVE NO. 2 HEATER TO REGISTER DUCT

58. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

a. Disconnect the connector.
b. Disengage the 2 claws and remove the automatic light control sensor.

INSTALLATION

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR

a. Engage the 2 claws and install the automatic light control sensor.
b. Connect the connector.

2. INSTALL NO. 2 HEATER TO REGISTER DUCT
3. INSTALL NO. 1 HEATER TO REGISTER DUCT
4. INSTALL DEFROSTER NOZZLE ASSEMBLY
5. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT
6. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT
7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player)
8. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player)
9. INSTALL ROOM TEMPERATURE SENSOR
10. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY
11. INSTALL PUSH START SWITCH
12. INSTALL NO. 1 INSTRUMENT PANEL MOUNTING BRACKET
13. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY
14. INSTALL NO. 1 SPEAKER HOLE COVER
15. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
16. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)
17. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
18. INSTALL FRONT PILLAR GARNISH RH
19. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
20. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)
21. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
22. INSTALL FRONT PILLAR GARNISH LH
23. INSTALL REAR CONSOLE BOX ASSEMBLY
24. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
25. INSTALL CONSOLE BOX CARPET
26. INSTALL CONSOLE BOX POCKET
27. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
28. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
29. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
30. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
31. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
32. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
33. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
34. INSTALL LOWER INSTRUMENT PANEL RH
35. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
36. INSTALL SIDE INSTRUMENT PANEL RH
37. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
38. INSTALL FRONT DOOR OPENING TRIM COVER RH
39. INSTALL FRONT DOOR SCUFF PLATE RH
40. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
41. INSTALL NO. 1 SWITCH HOLE BASE
42. INSTALL COMBINATION METER ASSEMBLY
43. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
44. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE
45. INSTALL TILT & TELESCOPIC SWITCH
46. INSTALL STEERING COLUMN COVER
47. INSTALL SPIRAL CABLE SUB-ASSEMBLY
48. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
49. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
50. INSTALL SIDE INSTRUMENT PANEL LH
51. INSTALL FRONT DOOR OPENING TRIM COVER LH
52. INSTALL FRONT DOOR SCUFF PLATE LH
53. INSTALL STEERING WHEEL ASSEMBLY
54. INSTALL STEERING PAD
55. INSTALL LOWER NO. 3 STEERING WHEEL COVER
56. INSTALL LOWER NO. 2 STEERING WHEEL COVER
57. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
58. INSPECT STEERING PAD
59. INSPECT SRS WARNING LIGHT.

60. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.