Ignition Switch: Service and Repair

Engine Switch:

ENGINE SWITCH

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
5. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
6. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
7. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)

8. REMOVE ENGINE SWITCH




a. Disconnect the switch connector.
b. Detach the 2 claws and remove the switch.

INSTALLATION

1. INSTALL ENGINE SWITCH




a. Attach the 2 claws to install the switch.
b. Connect the switch connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
6. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
9. ADJUST CLOCK