Scan Tool Testing and Procedures

DATA LIST

HINT: By accessing the DATA LIST displayed on the intelligent tester, values of switches and sensors can be checked without removing any parts. Reading the DATA LIST as the first step of troubleshooting is one method to save diagnostic time.

1. DATA LIST FOR OCCUPANT CLASSIFICATION ECU




a. Connect the intelligent tester to the DLC3.
b. Turn the engine switch on (IG).
c. Turn the tester on.
d. Enter the following menus: DIAGNOSIS / OBD/ MOBD / OCCUPANT DETECT / DATA LIST.

Part 1:

Part 2:

e. Check the values by referring to the table.

HINT: The Specified Condition for Zero Point Calibration in the table must be satisfied when the zero point calibration is performed.