Vehicle Stability Control System
DTC C1267/67 Brake Pedal Load Sensing SwitchDESCRIPTION
DTC Detecting Condition:
The brake pedal load sensing switch is turned on when the brake pedal is depressed with force exceeding a predetermined level.
The skid control ECU detects if the brake pedal is depressed or not via this circuit.
Wiring Diagram:
Step 1:
Step 2-3:
Step 3(Continued):
INSPECTION PROCEDURE
NOTE: When replacing the ABS and TRACTION actuator assembly, perform zero point calibration. Vehicle Stability Control System
HINT: If C1249/49 is output, repair it before repairing C1267/67 based on the flow given.