Overhaul

INSTRUMENT PANEL SAFETY PAD

Instrument Panel Safety Pad:

Instrument Panel Safety Pad:

Instrument Panel Safety Pad:

Instrument Panel Safety Pad:

Instrument Panel Safety Pad:

Instrument Panel Safety Pad:

DISASSEMBLY





1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
a. Remove the screw and duct.





2. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
a. Remove the screw and duct.





3. REMOVE DEFROSTER NOZZLE ASSEMBLY
a. Remove the 3 screws and nozzle.





4. REMOVE NO. 3 HEATER TO REGISTER DUCT
a. Remove the 3 screws and duct.





5. REMOVE NO. 1 HEATER TO REGISTER DUCT
a. Remove the 3 screws and duct.





6. REMOVE NO. 2 HEATER TO REGISTER DUCT
a. Remove the 4 screws and duct.





7. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
a. Using a screwdriver, detach the 4 claws.

HINT: Tape the screwdriver tip before use.

b. Using a screwdriver, detach the 6 clips and remove the register.

HINT: Tape the screwdriver tip before use.





8. REMOVE INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY
a. Using a screwdriver, detach the 2 claws.

HINT: Tape the screwdriver tip before use.

b. Using a screwdriver, detach the 6 claws and remove the register.

HINT: Tape the screwdriver tip before use.





9. REMOVE INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
a. Using a screwdriver, detach the 6 claws and remove the register.

HINT: Tape the screwdriver tip before use.

10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY





11. REMOVE INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY
a. Using a screwdriver, detach the 2 clips and 2 claws.

HINT: Tape the screwdriver tip before use.

b. Remove the speaker panel.





12. REMOVE INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY
a. Using a screwdriver, detach the 2 clips and 2 claws.

HINT: Tape the screwdriver tip before use.

b. Remove the speaker panel.





13. REMOVE NO. 1 SPEAKER HOLE COVER
a. Using a screwdriver, detach the 4 clips and remove the speaker panel.

HINT: Tape the screwdriver tip before use.

14. REMOVE FRONT NO. 2 SPEAKER RH
15. REMOVE FRONT NO. 2 SPEAKER LH
16. REMOVE FRONT STEREO COMPONENT SPEAKER
17. REMOVE ENGINE SWITCH
a. Remove the engine switch.

REASSEMBLY

HINT: A bolt without a torque specification is shown in the standard bolt chart.

1. INSTALL ENGINE SWITCH
a. Install the engine switch.

2. INSTALL FRONT STEREO COMPONENT SPEAKER
3. INSTALL FRONT NO. 2 SPEAKER LH
4. INSTALL FRONT NO. 2 SPEAKER RH





5. INSTALL NO. 1 SPEAKER HOLE COVER
a. Attach the 4 clips to install the speaker panel.





6. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY
a. Attach the 2 claws and 2 clips to install the speaker panel.





7. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY
a. Attach the 2 claws and 2 clips to install the speaker panel.

8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY





9. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
a. Attach the 6 claws to install the register.





10. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY
a. Attach the 8 claws to install the register.





11. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY
a. Attach the 6 clips and 4 claws to install the register.





12. INSTALL NO. 2 HEATER TO REGISTER DUCT
a. Install the duct with the 4 screws.





13. INSTALL NO. 1 HEATER TO REGISTER DUCT
a. Install the duct with the 3 screws.





14. INSTALL NO. 3 HEATER TO REGISTER DUCT
a. Install the duct with the 3 screws.





15. INSTALL DEFROSTER NOZZLE ASSEMBLY
a. Install the duct with the 3 screws.





16. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT
a. Install the duct with the screw.





17. INSTALL SIDE DEFROSTER NOZZLE DUCT NO. 1
a. Install the duct with the screw.