Driver Side Power Mirror Cannot Be Adjusted With Power Mirror Switch
Driver Side Power Mirror Cannot Be Adjusted With Power Mirror SwitchSYSTEM DESCRIPTION
This circuit detects the conditions of the mirror control switch.
The integration control and panel assembly sends information about the operating condition of the mirror switch (switch input signals) through the BEAN line. Then the switch input signals are sent to the front multiplex network door ECU LH. Mirror adjustment is controlled by the front multiplex network door ECU LH.
WIRING DIAGRAM
Wiring Diagram:
INSPECTION PROCEDURE
Step 1 - 2:
Step 3 - 4:
Step 5 - 6:
