Rear Seat Assembly

REAR SEAT ASSEMBLY

Rear Seat Assembly:

Rear Seat Assembly:

Rear Seat Assembly:

DISASSEMBLY

1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER
a. Remove the hog rings.





b. Remove the hog rings and seat cushion cover from the seat cushion frame (with pad).





2. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY





a. Remove the 2 nuts.
b. Pull the armrest in the direction indicated by the arrow in the illustration to detach the 2 claws. remove the armrest assembly.





3. REMOVE REAR SEAT CENTER ARMREST HINGE
a. Remove the 2 bolts and hinge.

4. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY
a. Separate the pad sub-assembly and box assembly





b. Remove the cover sub-assembly from the pad.





c. Remove the 2 screws and cup holder.

5. REMOVE BENCH TYPE REAR SEATBACK COVER
a. Detach the 12 claws and remove the 6 rear seat headrest supports.








b. Remove the 6 screws and rear seat shoulder belt guides LH and RH.





c. Remove the 2 screws and rear seat shoulder belt guide center.
d. Remove the hog rings.





e. Remove the hog rings and seatback cover from the seatback frame (with pad).





REASSEMBLY

HINT: A bolt without a torque specification is shown in the standard bolt chart.

1. INSTALL BENCH TYPE REAR SEATBACK COVER

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.

a. Using hog ring pliers, install the seatback cover to the seatback frame (with pad) with new hog rings.








b. Install the rear seat shoulder belt guides LH and RH with the 6 screws.
c. Install the rear seat shoulder belt guide center with the 2 screws.
d. Install the 6 rear seat headrest supports.

2. INSTALL REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY
a. Install the cup holder to the pad with the 2 screws.
b. Install the cover sub-assembly to the pad.
c. Install the pad sub-assembly to the box assembly.

3. INSTALL REAR SEAT CENTER ARMREST HINGE
a. Install the hinge with the 2 bolts.

4. INSTALL REAR SEAT ARMREST ASSEMBLY CENTER
a. Attach the 2 claws and install the armrest assembly with the 2 nuts.

5. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, avoid wrinkling the cover.

a. Using hog ring pliers, install the seat cushion cover to the seat cushion frame (with pad) with new hog rings.