Rear Seat Assembly

REAR SEAT ASSEMBLY

Rear Seat Assembly:

Rear Seat Assembly:

Rear Seat Assembly:

REMOVAL





1. REMOVE REAR SEAT CUSHION ASSEMBLY
a. Detach the seat cushion's 2 front hooks from the vehicle body.

NOTICE: Follow the instructions below carefully as the cushion frame deforms easily.

1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
2. Repeat for the other hook.

b. Detach the seat cushion's 2 rear hooks from the seatback.
c. Remove the seat cushion.

2. REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH
3. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
4. REMOVE REAR SEATBACK ASSEMBLY





a. Using a screwdriver, detach the claws and remove the 2 rear seat covers.

HINT: Tape the screwdriver tip before use.





b. Using a screwdriver, detach the claw to open the cap of the 3 rear seat shoulder belt guides.
c. Remove the bolt and floor anchor part.





d. Remove the 4 bolts and 2 nuts.
e. Remove the seatback.

INSTALLATION





1. INSTALL REAR SEATBACK ASSEMBLY
a. Place the seatback in the cabin.

NOTICE: Be careful not to damage the vehicle body.

b. Install the seatback with the 4 bolts and 2 nuts.

Torque: 18.1 N.m (185 kgf.cm, 13 ft.lbf)

c. Install the 2 rear seat covers.
d. Pass the 3 seat belts through and close the cap of the 3 rear seat shoulder belt guides.
e. Install the floor anchor part with the bolt.

2. INSTALL REAR SEAT HEADREST ASSEMBLY CENTER
3. INSTALL REAR SEAT HEADREST ASSEMBLY LH AND RH





4. INSTALL REAR SEAT CUSHION ASSEMBLY
a. Attach the seat cushion's 2 rear hooks to the seatback.
b. Attach the seat cushion's 2 front hooks to the vehicle body.
c. Confirm that the seat cushion is firmly installed.

NOTICE: When installing the seat cushion, make sure seat belt buckle is not under the seat cushion.