Tail Lamp: Testing and Inspection

ON-VEHICLE INSPECTION

1. CHECK REAR COMBINATION LIGHT ASSEMBLY




a. Disconnect the X1 and X3 connectors.
b. Connect the voltmeter's positive (+) lead to terminal X1-7 and the negative (-) lead to terminal X1-6.
c. Connect the voltmeter's positive (+) lead to terminal X3-2 and the negative (-) lead to terminal X3-6.




d. Measure the voltage of the connector.
e. Connect the voltmeter's positive (+) lead to terminal X1-5 and the negative (-) lead to terminal X1-6.
f. Connect the voltmeter's positive (+) lead to terminal X3-5 and the negative (-) lead to terminal X3-6.




g. Measure the voltage of the connector.

2. CHECK REAR LIGHT ASSEMBLY




a. Disconnect the Y2 and Y9 connectors.
b. Connect the voltmeter's positive (+) lead to terminal Y2-2 and the negative (-) lead to terminal Y2-4.
c. Connect the voltmeter's positive (+) lead to terminal Y9-2 and the negative (-) lead to terminal Y9-4.




d. Measure the voltage of the connector.

If the result is not as specified, replace the light assembly.