Trunk Lamp: Service and Repair

Luggage Compartment Room Light:

LUGGAGE COMPARTMENT ROOM LIGHT

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.




2. REMOVE NO.1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
a. Using a screwdriver, detach the claw and remove the light.

HINT: Tape the screwdriver tip before use.

b. Disconnect the connector.

INSTALLATION




1. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
a. Connect the connector.
b. Attach the claw to install the light.

2. CONNECT CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION
a. Perform initialization.

CAUTION: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.