TC and CG Terminal Circuit

TC and CG Terminal Circuit

DESCRIPTION
DTC output mode is set by connecting terminals TC and CG of the DLC3. The DTCs are displayed by blinking the tire pressure warning light.

WIRING DIAGRAM:

INSPECTION PROCEDURE

NOTICE:
^ When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the intelligent tester and write them down before removal.
^ It is necessary to perform initialization after registration of the transmitter IDs into the tire pressure warning ECU after the ECU and/or valve and transmitter has been replaced. Initialization

Steps 1-2:

Steps 3-4:

Step 5: