Keyless Entry Receiver: Service and Repair

Door Control Receiver:

DOOR CONTROL RECEIVER

REMOVAL




1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT




2. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER RH

3. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER LH




a. Remove the 2 clips and compartment trim side cover LH.




4. REMOVE TOOL BOX

5. REMOVE REAR FLOOR FINISH PLATE




a. Remove the 2 bolts and 2 hooks.
b. Remove the 3 clips labeled A.
c. Detach the 4 clips to remove the finish plate.

6. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT




a. Detach the hook.




b. Remove the rope hook.




c. Remove the 3 clips.
d. Detach the 4 claws and remove the trim cover.

7. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER RH




a. Remove the 5 clips and trim cover.

8. REMOVE DOOR CONTROL RECEIVER




a. Disconnect the receiver connector.
b. Remove the nut and receiver.

INSTALLATION

HINT: A bolt without a torque specification is shown in the standard bolt chart.

1. INSTALL DOOR CONTROL RECEIVER




a. Install the receiver with the nut.
b. Connect the receiver connector.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH




a. Install the trim cover with the 5 clips.

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT




a. Attach the 4 claws to install the trim cover.
b. Install the 3 clips.




c. Attach the hook.




d. Install the rope hook.

4. INSTALL REAR FLOOR FINISH PLATE




a. Install the finish plate with the 4 clips.
b. Install the 3 clips labeled A.
c. Install the 2 bolts and 2 hooks on the both side.




5. INSTALL TOOL BOX

6. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER LH




a. Install the compartment trim side cover LH with the 2 clips.




7. INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER RH




8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT