Customize Parameters
CUSTOMIZE PARAMETERS1. BUZZER ON / OFF SETTING
a. The combination meter's buzzer operation can be customized. There is an ON and OFF setting, which sets or disables the driver's and / or front passenger's seat belt buzzer.
NOTE: These buzzers should be set to ON as a safety precaution. If it is necessary to customize the buzzers, perform the procedures given.
HINT: The buzzer cancel mode ends when either of the following is performed: 1) the ODO/TRIP switch not operated for 10 seconds, or 2) the power switch is turned OFF.
2. CUSTOMIZE PARAMETERS (Using Intelligent Tester)
HINT: The following items can be customized.
NOTE: Be sure to record the current value before customizing.