Trunk Lamp: Service and Repair

Luggage Compartment Room Light:

LUGGAGE COMPARTMENT ROOM LIGHT

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY




a. Using a screwdriver, detach the claw and remove the light.

HINT: Tape the screwdriver tip before use.

b. Disconnect the connector.

INSTALLATION

1. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY




a. Connect the connector.
b. Attach the claw to install the light.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

3. PERFORM INITIALIZATION
a. Perform initialization.

CAUTION: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.