Without Scan Tool

DTC CHECK / CLEAR





1. CHECK DTC (USING SST CHECK WIRE)
(a) Check DTCs.
(1) Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST 09843-18040
(2) Turn the power switch ON (IG).
(3) Read and record any DTCs indicated by the multi-information display on the combination meter.

HINT:
^ If the multi-information display does not indicate any DTCs or the normal system code, inspect the multi-information display or TC and CG terminal circuit.





^ If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.

(4) Refer to the Diagnostic Trouble Code Chart for DTC information. Diagnostic Trouble Code Descriptions
(5) After completing the check, turn the power switch OFF and remove SST from the DLC3.
SST 09843-18040





2. CHECK DTC (USING INTELLIGENT TESTER)
(a) Check DTCs.
(1) Connect the intelligent tester (with CAN VIM) to the DLC3.
(2) Turn the power switch ON (IG).
(3) Read the DTCs following the prompts on the tester screen.

HINT:
Refer to the intelligent tester operator's manual for further details.

3. CLEAR DTC

HINT:
After repairing the malfunctions, clear the DTCs.

(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the power switch ON (IG).
(c) Clear the DTCs following the prompts on the tester screen.

HINT:
Refer to the intelligent tester operator's manual for further details.