Open in CAN Main Wire
Open in CAN Main WireDESCRIPTION
There may be an open circuit in the CAN main wire and / or the DLC3 branch wire when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is 69 ohms or more.
Wiring Diagram:
Step 1:
Step 2-3:
Step 4-6:
Step 6 (Continued)-8:
Step 8 (Continued)-10:
INSPECTION PROCEDURE
NOTE: Turn the power switch OFF before measuring the resistances of the main wire and the branch wire.
HINT: Operating the power switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes resistance variation.