Hybrid Battery Service Switch: Service and Repair

REMOVAL

1. OBSERVE PRECAUTIONS FOR HIGH-VOLTAGE CIRCUIT INSPECTION AND SERVICE
2. REMOVE BATTERY SERVICE HOLE COVER LH
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE SERVICE PLUG GRIP
5. REMOVE ELECTRIC VEHICLE FUSE




a. Release the 2 claws and remove the service plug grip cover.




b. Remove the 2 bolts and electric vehicle fuse.

INSTALLATION

1. INSTALL ELECTRIC VEHICLE FUSE




a. Install the electric vehicle fuse with the 2 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)




b. Install the service plug grip cover with the 2 craws.

2. INSTALL SERVICE PLUG GRIP
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSTALL BATTERY SERVICE HOLE COVER LH
5. PERFORM INITIALIZATION
a. Perform initialization procedure.

NOTE: Some vehicle systems require initialization after reconnecting the cable to the negative battery terminal.