Electronic Power Steering System

DTC CHECK / CLEAR





1. CHECK DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the intelligent tester on.
(d) Read the DTCs by following the display on the intelligent tester.

HINT:
Refer to the intelligent tester's operator's manual for further details.

2. CLEAR DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the intelligent tester on.
(d) Clear the DTCs by following the display on the intelligent tester.

HINT:
Refer to the intelligent tester's operator's manual for further details.