Absorber Control Indicator Light Remains ON

Absorber Control Indicator Light Remains ON

DESCRIPTION

- Check the DTC and make sure that the normal system code is output.
If a malfunction code is output, refer to the "DIAGNOSTIC TROUBLE CODE CHART".

- If the absorber control ECU stores a DTC, the absorber control indicator light on the combination meter will come on.
- The absorber control ECU is connected to the combination meter via the CAN communication system and multiplex communication system.

Wiring Diagram:

Step 1-4:

Step 4(Continued)-5:

INSPECTION PROCEDURE

NOTE: When replacing the absorber control ECU, check the acceleration sensor signal after replacement.

HINT:
- Start the inspection from "CHECK FOR DTC (CAN COMMUNICATION SYSTEM)" when troubleshooting in accordance with the PROBLEM SYMPTOMS TABLE.
- Check the condition of each related circuit connector before troubleshooting.