Interior - Driver Seat/Head Restraint Initialization

PRE-DELIVERY SERVICE
PD015-06

Title:
INITIALIZATION OF DRIVER'S SEAT &
HEAD RESTRAINT HEIGHT

Models:
'07 GS 450h

March 3, 2006

Introduction

The head restraint height of the driver's seat is automatically adjusted according to the driver's seat position. This head restraint height has been set to the default position at the assembly plant so that the head restraint height will be in the upper-most position when the seat is moved to the rear-most position. However, the head restraint position may have been adjusted by manual operation during transit and storage.

Follow this procedure to ensure that the head restraint is set to the default position.

Applicable Vehicles

^ 2007 model year GS 450h vehicles.

Initialization Procedure

1. Without depressing the brake pedal, push the engine START/STOP switch twice to select the "IG-ON" mode.





2. Manually set the head restraint upward to the highest position.





3. Move the seat backward to the most rear position until the seat motor stops.

4. Move the driver's seat forward and check that the head restraint is moved downward according to the driver's seat position.





Warranty Information