Front Door: Adjustments
ADJUSTMENT1. ADJUST FRONT DOOR PANEL SUB-ASSEMBLY LH
a. Turn the ignition switch OFF.
b. Disconnect the cable from the negative (-) battery terminal.
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
c. Adjust the door's position.
1. Using SST, loosen the body's hinge bolts and adjust the door's position.
SST 09812-00010
2. Tighten the body's hinge bolts after the adjustment.
Torque: 32.5 N.m (331 kgf.cm, 24 ft.lbf)
3. Loosen the door's hinge bolts and adjust the door's position.
4. Tighten the door's hinge bolts after the adjustment.
Torque: 32.5 N.m (331 kgf.cm, 24 ft.lbf)
d. Adjust the striker's position.
1. Using a screwdriver, disengage the 4 claws and remove the door lock striker cover.
HINT: Tape the screwdriver tip before use.