Outer Rear View Mirror
OUTER REAR VIEW MIRROROuter Rear View Mirror:
REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedure listed below are for the LH side.
1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
3. REMOVE FRONT DOOR WINDOW UPPER BRACKET GARNISH LH
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
5. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Disconnect the mirror connector labeled A.
b. Remove the clamp labeled B.
c. Remove the 3 bolts and outer rear view mirror.
6. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
a. Using a moulding remover, detach the 4 claws.
HINT: Apply protective tape to the mirror body.
b. Pull up the mirror and remove it.
c. Remove the 2 connectors and disconnect the mirror.
7. REMOVE OUTER MIRROR COVER LH
a. Remove the 4 screws.
b. Detach the claw and remove the visor rim.
c. Remove the protect cover LH.
d. Detach the 3 clamps and remove the outer mirror cover.
INSTALLATION
1. INSTALL OUTER MIRROR COVER LH
a. Install the mirror cover as shown in the illustration.
b. Install the protect cover LH.
c. Install the visor rim and attach the claw.
d. Install the 4 screws.
e. After installing the outer mirror cover, check that there is no gap between the cover and mirror visor rim.
HINT: If there is a gap between the cover and visor rim, noises may occur during driving.
2. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
a. Connect the black connector to the terminal with the "B" engraving next to it.
b. Connect the white connector to the terminal with the "W" engraving next to it.
c. Install the mirror as shown in the illustration.
3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Install the mirror with the 3 bolts.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
b. Install the clamp.
c. Connect the connector.
4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
5. INSTALL FRONT DOOR WINDOW UPPER BRACKET GARNISH LH
6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY