License Plate Lamp: Service and Repair

License Plate Light Assembly:

LICENSE PLATE LIGHT ASSEMBLY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR FLOOR FINISH PLATE
3. REMOVE SPARE WHEEL COVER ASSEMBLY
4. REMOVE SPARE TIRE
5. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
6. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH
7. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH
8. REMOVE TOOL BOX COVER
9. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
10. REMOVE LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY
11. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY RH
12. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY LH
13. REMOVE TONNEAU COVER ASSEMBLY
14. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
15. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER
16. REMOVE REAR FLOOR FINISH SIDE PLATE RH
17. REMOVE REAR FLOOR FINISH SIDE PLATE LH
18. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
19. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE RH
20. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE LH
21. REMOVE REAR BUMPER COVER

22. REMOVE LICENSE PLATE LIGHT ASSEMBLY
a. Detach the claw and remove the license plate light.

INSTALLATION

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY
a. Attach the claw to install the license plate light.

2. INSTALL REAR BUMPER COVER
3. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH
4. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT
6. INSTALL REAR FLOOR FINISH SIDE PLATE LH
7. INSTALL REAR FLOOR FINISH SIDE PLATE RH
8. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER LOWER
9. INSTALL TONNEAU COVER ASSEMBLY
10. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY RH
11. INSTALL TONNEAU COVER STOPPER SUB-ASSEMBLY LH
12. INSTALL LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY
13. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
14. INSTALL TOOL BOX COVER
15. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
16. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH
17. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
18. INSTALL SPARE TIRE
19. INSTALL SPARE WHEEL COVER ASSEMBLY
20. INSTALL REAR FLOOR FINISH PLATE
21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
22. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.