For Vehicles Equipped With Mobile Communication Systems

FOR VEHICLES EQUIPPED WITH MOBILE COMMUNICATION SYSTEMS




a. Install the antenna as far away from the ECU and sensors of the vehicle electronic systems as possible.
b. Install the antenna feeder at least 20 cm (7.87 in.) away from the ECU and sensors of the vehicle electronic systems. For details about ECU and sensor locations, refer to the section of the applicable components.
c. Keep the antenna and feeder separate from other wiring as much as possible. This will prevent signals of the communication equipment from affecting vehicle equipment and vice versa.
d. Check that the antenna and feeder are correctly adjusted.
e. Do not install a high-powered mobile communication system.