Without Scan Tool

DTC CHECK / CLEAR





1. CHECK DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DTCs by following the prompts on the tester screen.

HINT: Please refer to the intelligent tester operator's manual for further details.

2. CLEAR DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the ignition switch ON.
(c) Erase the DTCs by following the directions on the tester screen.

HINT: Please refer to the intelligent tester operator's manual for further details.