Installation

INSTRUMENT PANEL: REAR CONSOLE BOX: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL CONSOLE BOX






(a) Connect the connector.
(b) Install the console box with the 4 bolts and 2 screws.
2. INSTALL CONSOLE BOX REGISTER ASSEMBLY






(a) Attach the 4 clips to install the register.
3. INSTALL CONSOLE BOX PLATE






(a) Connect the connector.
(b) Attach the 4 clips to install the console box plate.
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH






(a) Attach the 4 clips and 3 claws to install the finish panel end.
(b) Install the screw.
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH






(a) Attach the 3 clips and 3 claws to install the finish panel end.
(b) Install the screw.
6. INSTALL CONSOLE UPPER PANEL ASSEMBLY






(a) Connect the connector.
(b) Attach the 9 clips to install the console upper panel.






(c) Install the shift lever knob and turn it in the direction indicated by the arrow.
7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
(a) Attach the claws to install the garnish.
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.

10. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.