Installation

MIRROR: OUTER REAR VIEW MIRROR: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY Installation

2. INSTALL OUTER MIRROR LIGHT ASSEMBLY Installation

3. INSTALL OUTER MIRROR
(a) Connect each connector.






(b) Engage the 4 claws and install the outer mirror.
4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY






(a) Install the outer rear view mirror assembly with the 3 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Engage the clip.
(c) Connect the connector.
5. INSTALL DOOR FRAME GARNISH LH Installation

6. INSTALL FRONT DOOR TRIM COVER LH Installation

7. INSTALL FRONT DOOR GLASS WEATHERSTRIP INNER LH Installation

8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Installation

9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.