Cruise Control System

CRUISE CONTROL: CRUISE CONTROL SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. DTC CHECK
(a) Connect the Techstream (with CAN VIM) to the DLC3.
(b) Turn the power switch ON (IG).
(c) Read the DTCs by following the directions on the tester screen.
HINT: Refer to the Techstream operator's manual for further details.

2. DTC CLEAR
(a) Connect the Techstream (with CAN VIM) to the DLC3.
(b) Turn the power switch ON (IG).
(c) Read the DTCs by following the directions on the tester screen.
HINT: Refer to the Techstream operator's manual for further details.