Odo / Trip Switch Malfunction

METER: METER / GAUGE SYSTEM: Odo / Trip Switch Malfunction

Odo / Trip Switch Malfunction

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK MULTIPLEX COMMUNICATION SYSTEM
(a) Check the DTC Multiplex Communication System.

Result:





B -- GO TO MULTIPLEX COMMUNICATION SYSTEM
A -- Continue to next step.
2. READ VALUE USING TECHSTREAM (ODO/TRIP CHANGE SWITCH, TRIP RESET SW)
(a) Connect the Techstream to the DLC3.
(b) Power switch on (IG).
(c) Turn the tester ON.
(d) Enter following menus: Body Electrical / D-SEAT SW / Data List.
(e) Check the values by referring to the table below.

D-SEAT SW:





OK:
Switch condition (ON/OFF) can be switched by actual operation.
NG -- REPLACE INTEGRATION CONTROL AND PANEL
OK -- REPLACE COMBINATION METER