Installation

2GR-FSE STARTING: POWER SWITCH: INSTALLATION

INSTALLATION





1. INSTALL POWER SWITCH
(a) Attach the 2 claws to install the switch.
(b) Connect the switch connector.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY Installation

5. INSTALL INSTRUMENT SIDE PANEL LH Installation

6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation

8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

9. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation

10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

13. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.