Ignition Switch: Testing and Inspection

2GR-FSE STARTING: POWER SWITCH: INSPECTION

INSPECTION

1. INSPECT POWER SWITCH






(a) Measure the resistance of the switch.
Standard resistance:





If the result is not as specified, replace the power switch.
(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.
HINT:
- If the positive (+) lead and the negative (-) lead are incorrectly connected, the power switch indicator does not illuminate.
- If the voltage is too low, the indicator will not illuminate.

OK:










If the result is not as specified, replace the power switch.