Removal

2GR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Removal

2. DISCHARGE FUEL SYSTEM PRESSURE Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE SERVICE PLUG GRIP Removal

5. REMOVE COOL AIR INTAKE DUCT SEAL Removal

6. REMOVE ENGINE ROOM SIDE COVER LH Removal

7. REMOVE ENGINE ROOM SIDE COVER RH Removal

8. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

9. REMOVE FRONT UPPER FENDER PROTECTOR LH Removal

10. REMOVE FRONT UPPER FENDER PROTECTOR RH Removal

11. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal

12. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal

13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

14. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

15. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

16. DRAIN ENGINE COOLANT Service and Repair

17. DISCONNECT NO. 2 VENTILATION HOSE Removal

18. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal

19. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY Removal

20. REMOVE INTAKE AIR SURGE TANK Removal

21. REMOVE INTAKE MANIFOLD Removal

22. DISCONNECT WATER HOSE JOINT Removal

23. REMOVE NO. 1 FUEL PIPE Removal







24. REMOVE FUEL PRESSURE SENSOR
(a) Disconnect the connector and clamp.
(b) Remove the fuel pressure sensor and gasket.