Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE CONSOLE UPPER PANEL GARNISH FRONT Removal

3. REMOVE FRONT ASH RECEPTACLE ASSEMBLY
4. REMOVE INSTRUMENT PANEL FINISH LH PANEL END Removal

5. REMOVE INSTRUMENT PANEL FINISH RH PANEL END Removal

6. REMOVE CONSOLE BOX PLATE Removal

7. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal

8. REMOVE CONSOLE BOX Removal

9. REMOVE CENTER AIRBAG SENSOR ASSEMBLY






(a) Disconnect the holder (with connectors).
(b) Remove the nut, 2 bolts and center airbag sensor.