Operation CHARM: Car repair manuals for everyone.

Removal








SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT DOOR SCUFF PLATE Removal

3. REMOVE REAR DOOR SCUFF PLATE Removal

4. REMOVE CENTER PILLAR GARNISH LOWER Removal

5. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY






(a) Disconnect the pretensioner connector as shown in the illustration labeled A.
(b) Disconnect the tension reducer connector labeled B.
(c) Disconnect the pre-collision connector labeled C.






(d) Remove the 2 bolts and disconnect the front seat outer belt assembly.
6. REMOVE FRONT SEAT BELT RETRACTOR COVER






(a) Disengage the claw and remove the front seat belt retractor cover from the body.
7. REMOVE WIRE HARNESS PROTECTOR






(a) Disengage the 2 claws (A) and open the protector cover.
(b) Disconnect the connector.
(c) Disengage the 3 claws (B) and remove the wire harness protector from the body.
(d) Remove the hole plug.
8. REMOVE SIDE AIRBAG SENSOR






(a) Remove the 2 bolts and side airbag sensor from the body.
(b) Disconnect the connector.