Removal

BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read the "PRECAUTION" thoroughly before servicing Diagnosis System.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal

5. REMOVE NO. 3 STEERING WHEEL COVER LOWER Removal

6. REMOVE STEERING WHEEL PAD Removal

7. REMOVE STEERING WHEEL ASSEMBLY Removal

8. REMOVE STEERING COLUMN COVER Removal

9. REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR
10. REMOVE STEERING ANGLE SENSOR






(a) Detach the 6 claws and remove the sensor from the spiral cable.