Crankshaft Main Bearing

Crank shaft bearing cap set bolt diameter
Standard 10.8 to 11.0 mm (0.4252 to 0.4331 in.)
Minimum 10.7 mm (0.4213 in.)

Crankshaft oil clearance
Standard 0.014 to 0.036 mm (0.0005 to 0.0014 in.)
Minimum 0.060 mm (0.0023 in.)














Main bearing cap x Cylinder block sub-assembly
16 point head 1st 61 nm 622 kgf-cm 45 ft.lbf
2nd Turn 90� nm Turn 90� kgf-cm Turn 90� ft.lbf
12 mm head 26 nm 265 kgf-cm 19 ft.lbf