Active Stabilizer Suspension System

SUSPENSION CONTROL: ACTIVE STABILIZER SUSPENSION SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU

1. CHECK FRONT ACTIVE STABILIZER CONTROL ECU





HINT: The voltage cannot be measured with the connector connected to the front active stabilizer control ECU as the connector is water resistant.





2. CHECK REAR ACTIVE STABILIZER CONTROL ECU





HINT: The voltage cannot be measured with the connector connected to the rear active stabilizer control ECU as the connector is water resistant.





3. CHECK ACTIVE STABILIZER CONVERTER









(a) Disconnect the y2, y3 and y5 active stabilizer converter connectors.
(b) Measure the voltage and resistance of the wire harness side connectors.





If the result is not as specified, there may be a malfunction on the wire harness side.