On-Vehicle Inspection

L110 HYBRID TRANSMISSION / TRANSAXLE: HYBRID TRANSMISSION SYSTEM: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT CHECK SHIFT LOCK OPERATION
(a) Move the shift lever to the P position.
(b) Check that the shift lever cannot be moved to any position other than P.
(c) Turn the power switch on (IG), depress the brake pedal and check that the shift lever can be moved to the other positions.
2. CHECK SHIFT LOCK RELEASE BUTTON OPERATION
(a) Using a screwdriver, remove the shift lock release cover.
(b) When operating the shift lever with the shift lock release button pressed, check that the lever can be moved to any position other than P. If the operation cannot be done as specified, check the shift lever assembly installation condition.
3. OPERATION CHECK
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Select the following menu items: Powertrain / Hybrid Control / Control the Shift Position.
(d) Select the following menu items: User Data / B1 Oil Pressure, B2 Oil Pressure, Line Pressure, Line Pressure Solenoid.
(e) Perform the Control the Shift Position active test.
(f) Read the user data.






(g) Turn the power switch on (IG).
(h) Select the following menu items: Powertrain / Hybrid Control / Active Test / Activate the Oil Pump (500rpm), Activate the Oil Pump (1000rpm).
NOTE: Make sure that the auxiliary battery is not discharged.

(i) Select the following menu items: User Data / OPM Target Revolution, OPM Revolution.
NOTE: The OPM Target Revolution and OPM Revolution values should be almost the same.