Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2008 >> LS 600h V8-5.0L (2UR-FSE) Hybrid >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Engine Immobilizer System

Engine Immobilizer System








ENGINE IMMOBILIZER: ENGINE IMMOBILIZER SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST
HINT: Using the intelligent tester or Techstream to read the DATA LIST allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / BODY SYSTEM / SMART ACCESS / DATA LIST.
(2) Techstream - Select: Body Electrical / Smart Access / Data List.
(e) According to the display on tester, read the "DATA LIST" or "Data List".
(1) Intelligent tester

SMART ACCESS:









(2) Techstream

Smart Access:









2. ACTIVE TEST
HINT: Using the intelligent tester or Techstream to perform ACTIVE TEST allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing ACTIVE TEST early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TEST.

(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus:
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / BODY SYSTEM / SMART ACCESS / ACTIVE TEST.
(2) Techstream - Select: Body Electrical / Smart Access / Active Test.
(e) According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
(1) Intelligent tester

SMART ACCESS:





(2) Techstream

Smart Access:





pro multis · About Operation CHARM