Disc Player Controller Power Source Circuit

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Disc Player Controller Power Source Circuit

Disc Player Controller Power Source Circuit

DESCRIPTION

This circuit provides power to the disc player.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. INSPECT FUSE (RR MPX-B 1, RR-ACC)
(a) Disconnect the RR MPX-B 1 and RR-ACC fuses from the rear junction block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:

NG -- REPLACE FUSE
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (REAR SEAT CONSOLE BOX - BATTERY AND BODY GROUND)

(a) Disconnect the R16 box connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE