Disassembly

EXTERIOR: FRONT BUMPER: DISASSEMBLY

DISASSEMBLY





1. REMOVE FRONT LOWER BUMPER COVER
(a) Using a screwdriver, detach the 2 claws and remove the lower bumper cover.
HINT:
- Tape the screwdriver tip before use.
- Detach the claw on the inner side first.





2. REMOVE LOWER RADIATOR GRILLE LH
(a) Detach the 16 claws and remove the radiator grille.
3. REMOVE LOWER RADIATOR GRILLE RH
HINT: Use the same procedures described for the LH side.

4. REMOVE FRONT SPOILER
(a) Detach the 7 clips.
(b) Remove the 4 clips and front spoiler.









5. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
(a) Remove the 2 screws and mounting bracket.
6. REMOVE FOG LIGHT ASSEMBLY LH Removal

7. REMOVE FOG LIGHT ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

8. REMOVE NO. 4 ENGINE ROOM WIRE Removal

9. REMOVE NO. 1 ULTRASONIC SENSOR Removal

10. REMOVE NO. 2 ULTRASONIC SENSOR Removal

11. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER Removal

12. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER Removal

13. REMOVE FRONT BUMPER PAD LH
(a) Remove the bumper pad from the front bumper.
14. REMOVE FRONT BUMPER PAD RH
HINT: Use the same procedures described for the LH side.