Removal

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): REMOVAL

REMOVAL
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

2. REMOVE BATTERY SERVICE HOLE COVER LH Battery

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Removal

5. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY [1][2]Removal

6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Removal

7. REMOVE FRONT DOOR SERVICE HOLE COVER LH [1][2]Removal

8. REMOVE FRONT INNER DOOR GLASS WEATHERSTRIP LH [1][2]Removal

9. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH [1][2]Removal

10. REMOVE FRONT DOOR OUTSIDE HANDLE COVER LH [1][2]Removal

11. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH [1][2]Removal