Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Rear): INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR DOOR OUTSIDE HANDLE ASSEMBLY LH [1][2]Installation

2. INSTALL REAR DOOR OUTSIDE HANDLE COVER LH [1][2]Installation

3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH [1][2]Installation

4. INSTALL REAR DOOR QUARTER WINDOW GLASS LH [1][2]Installation

5. INSTALL REAR DOOR GLASS RUN LH [1][2]Installation

6. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH [1][2]Installation

7. INSTALL REAR LOWER DOOR DIVISION BAR BRACKET LH [1][2]Installation

8. INSTALL REAR DOOR SERVICE HOLE COVER LH [1][2]Installation

9. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH [1][2]Installation

10. INSTALL REAR SIDE TRIM BOARD COVER LH (w/ Rear Door Sunshade) [1][2]Installation

11. INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade) [1][2]Installation

12. INSTALL REAR CURTAIN SUB-ASSEMBLY LH (w/ Rear Door Sunshade) [1][2]Installation

13. INSTALL REAR NO. 2 DOOR FRAME GARNISH LH [1][2]Installation

14. INSTALL REAR DOOR FRAME GARNISH LH [1][2]Installation

15. INSTALL REAR DOOR TRIM COVER LH [1][2]Installation

16. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH [1][2]Installation

17. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY [1][2]Installation

18. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH [1][2]Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

20. INSTALL BATTERY SERVICE HOLE COVER LH Battery

21. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY