Scan Tool Testing and Procedures

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. READ DATA LIST
HINT: Using the intelligent tester or Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus.
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / BODY SYSTEM / (desired system) / DATA LIST.
(2) Techstream - Select: Body Electrical / (desired system) / Data List.
(e) According to the display on tester, read the "DATA LIST" or "Data List".
(1) Intelligent tester

MAIN BODY





D-DOOR





P-DOOR





RL-DOOR





RR-DOOR





PBD/PTL





(2) Techstream

Main Body





Driver Door





Passenger Door





Rear Left Door





Rear Right Door





Back Door





2. ACTIVE TEST
HINT: Using the intelligent tester or Techstream to perform Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Test early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Test.

(a) Connect the intelligent tester or Techstream to the DLC3.
(b) Turn the power switch ON (IG).
(c) Turn the tester on.
(d) Enter the following menus.
(1) Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / BODY SYSTEM / (desired system) / ACTIVE TEST.
(2) Techstream - Select: Body Electrical / (desired system) / Active Test.
(e) According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
(1) Intelligent tester

MAIN BODY:





D-DOOR:





P-DOOR:





RL-DOOR:





RR-DOOR:





(2) Techstream

Main Body:





Driver Door:





Passenger Door:





Rear Left Door:





Rear Right Door: