Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2008 >> LS 600h V8-5.0L (2UR-FSE) Hybrid >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Rear Seat Assembly (for Power Seat) >> Disassembly

Disassembly








SEAT: REAR SEAT ASSEMBLY (for Power Seat): DISASSEMBLY

DISASSEMBLY
CAUTION: Wear protective gloves. Sharp areas on the seatback spring, seat adjuster and seat cushion spring may injure your hands.





1. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY LH
(a) Remove the hog rings and seat cushion spring.






2. REMOVE REAR SEAT CUSHION COVER SUB-ASSEMBLY LH
(a) Remove the hog rings and seat cushion cover from the seat cushion pad.






3. REMOVE REAR SEAT SHOULDER BELT GUIDE ASSEMBLY LH
(a) Remove the 3 screws and shoulder belt guide.






4. REMOVE REAR SEAT HEADREST ASSEMBLY LH
(a) Remove the 2 pins and headrest.






5. REMOVE REAR SEAT HEADREST SUPPORT LH
(a) Detach the 4 claws and remove the 2 headrest supports.






6. REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY LH
(a) Remove the wire harness clamp.
(b) Disconnect the connector.
(c) Remove the 2 bolts and detach the 2 claws.
(d) Remove the headrest adjuster.






7. REMOVE POSITION CONTROL ECU LH
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts and position control ECU.






8. REMOVE SEAT CLIMATE CONTROL ECU LH
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts and climate control ECU.






9. REMOVE REAR NO. 2 SEAT COVER BEZEL
(a) Using a clip remover, remove the clip and cover bezel.
10. REMOVE REAR SEATBACK COVER WITH PAD LH






(a) Remove the nut and 2 seatback cover brackets.






(b) Disconnect the connector.
(c) Remove the clamp to disconnect the wire harness.
(d) Detach the hooks and remove the hog rings and the seatback cover (with pad) from the seatback frame.









11. REMOVE REAR SEATBACK COVER SUB-ASSEMBLY LH
(a) Remove the hog rings and seatback cover from the seatback pad.
12. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER LH






(a) Disconnect the 2 connectors and remove the 3 nuts.






(b) Detach the 3 hooks and remove the climate control blower.
13. REMOVE REAR SEAT WIRE LH
14. REMOVE REAR SEAT INNER BELT ASSEMBLY LH Removal







15. REMOVE REAR SEAT INNER BELT ANCHOR BRACKET ASSEMBLY LH
(a) Remove the nut and anchor bracket.
16. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH





(a) Remove the wire harness clamp.
(b) Remove the seat cushion pad.






(c) Disconnect the 2 connectors.
(d) Remove the 2 screws.
(e) Detach the claws and remove the climate control controller.






17. REMOVE SEAT CLIMATE CONTROL BLOWER LH
(a) Remove the 3 nuts and climate control blower.






18. REMOVE AIR FILTER LH
(a) Detach the 2 claws and remove the filter.
19. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

20. REMOVE REAR SEAT CUSHION COVER SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

21. REMOVE REAR SEAT SHOULDER BELT GUIDE ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

22. REMOVE REAR SEAT HEADREST ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

23. REMOVE REAR SEAT HEADREST SUPPORT RH
HINT: Use the same procedures described for the LH side.

24. REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

25. REMOVE POSITION CONTROL ECU RH
HINT: Use the same procedures described for the LH side.

26. REMOVE SEAT CLIMATE CONTROL ECU RH
HINT: Use the same procedures described for the LH side.

27. REMOVE REAR NO. 1 SEAT COVER BEZEL
HINT: Use the same procedures described for the No. 2 seat cover bezel.

28. REMOVE REAR SEATBACK COVER WITH PAD RH
HINT: Use the same procedures described for the LH side.

29. REMOVE REAR SEATBACK COVER SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

30. REMOVE REAR SEATBACK CLIMATE CONTROL BLOWER RH
HINT: Use the same procedures described for the LH side.

31. REMOVE REAR SEAT WIRE RH
HINT: Use the same procedures described for the LH side.

32. REMOVE REAR SEAT INNER BELT ASSEMBLY RH Removal

33. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY Removal

34. REMOVE REAR SEAT INNER BELT ANCHOR BRACKET ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

35. REMOVE SEAT CLIMATE CONTROL CONTROLLER RH
HINT: Use the same procedures described for the LH side.

36. REMOVE SEAT CLIMATE CONTROL BLOWER RH
HINT: Use the same procedures described for the LH side.

37. REMOVE AIR FILTER RH
HINT: Use the same procedures described for the LH side.

38. REMOVE CENTER SEAT CUSHION COVER





(a) Remove the hog rings and seat cushion cover from the seat cushion pad.
(b) Remove the seat cushion pad from the seat cushion frame.






39. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
(a) Remove the 2 bolts and center headrest.






40. REMOVE CENTER SEATBACK FRAME COVER
(a) Detach the 2 clips and remove the cover.






41. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY
(a) Remove the wire harness clamp.
(b) Remove the 2 nuts and center armrest.
42. REMOVE REAR CENTER NO. 1 SEAT ARMREST PANEL






(a) Remove the 2 screws and rear seat armrest hole board.






(b) Detach the claw and remove the center armrest door.






(c) Remove the armrest door lock seal.
(d) Remove the screw.
(e) Detach the 12 claws and remove the No. 2 center armrest panel (with No. 1 panel).
(f) Disconnect the 2 connectors.






(g) Remove the 3 screws and No. 1 center armrest panel.
43. REMOVE REAR POWER SEAT MODULE SWITCH ASSEMBLY Removal







44. REMOVE REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY
(a) Remove the 2 screws and cup holder.
45. REMOVE CURTAIN SWITCH ASSEMBLY






(a) Remove the 8 screws and rear No. 2 seat center armrest box.






(b) Remove the 2 screws and curtain switch.
(c) Disconnect the connector.
46. REMOVE SWITCH WIRE






(a) Disconnect the connector and remove the 3 wire harness clamps.
pro multis · About Operation CHARM