Timing Components: Specifications

Timing Chain Tensioner
While pushing down the No. 3 chain tensioner, insert a pin of dia 1.0 mm (0.0394 in.) into the hole to fix it in place.

Timing Chain Cover
Install the timing chain cover straight pin.
Using a plastic-faced hammer, tap in new straight pins to the timing chain cover.
Standard protrusion: 5.5 to 6.5 mm (0.217 to 0.256 in.)





Timing Chain Cover Stud Bolt
Using an E8 "TORX" socket wrench, install the 2 stud bolts as shown in the illustration.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Crankshaft Pulley





Align the pulley set key with the key groove of the pulley, and slide on the pulley.
Torque: 300 Nm (3059 kgf-cm, 221 ft-lbf)