Installation

L110F HYBRID VEHICLE CONTROL: HYBRID VEHICLE CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL ECU BRACKET






(a) Install the 2 ECU brackets with the 4 screws.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
2. INSTALL HYBRID VEHICLE CONTROL ECU






(a) Install the hybrid vehicle control ECU with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the 4 hybrid vehicle control ECU connectors.
3. INSTALL ENGINE ROOM ECU COVER Installation

4. INSTALL ENGINE ROOM SIDE COVER LH Installation

5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. RESET MEMORY
(a) If the hybrid vehicle control ECU is replaced, initialize the learning value of the automatic transmission Programming and Relearning.