Disassembly

LIGHTING: HEADLIGHT ASSEMBLY (for LED Headlight): DISASSEMBLY

DISASSEMBLY

1. REMOVE HEADLIGHT COVER






(a) Turn the cover in the direction indicated by the arrow and remove it.
2. REMOVE FRONT TURN SIGNAL LIGHT BULB






(a) Disconnect the connector.






(b) Turn the bulb as shown in the illustration to remove it.
3. REMOVE NO. 1 HEADLIGHT BULB






(a) Turn the cover in the direction indicated by the arrow and remove it.






(b) Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration.
(c) Disconnect the connector and remove the No. 1 headlight bulb.
NOTE: Do not touch the glass part of the bulb.

4. REMOVE HEADLIGHT LEVELING MOTOR LH






(a) Disconnect the connector.
(b) Turn the headlight leveling motor LH in the direction indicated by the arrow and lightly pull it out.






(c) Pull out the leveling motor, and then detach the tip of the motor from the reflector to remove the motor.
5. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING
(a) Remove the new packing.
6. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH






(a) Remove the 4 screws and ECU.
(b) Disconnect the connector.
7. REMOVE NO.1 HEADLIGHT COVER GASKET
(a) Remove the gasket.
8. REMOVE HEADLIGHT SWIVEL MOTOR






(a) Turn the aiming screw clockwise, and move the headlight swivel motor so that it can be removed.






(b) Disconnect the connector.
(c) Remove the 3 screws.






(d) Apply tape as shown in the illustration.






(e) Remove the swivel motor as shown in the illustration.
NOTE: Make sure not to damage the headlight control ECU socket's harness.

9. REMOVE FRONT BUMPER BAR REINFORCEMENT LH






(a) Remove the 2 screws and bumper bar reinforcement.
10. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH






(a) Detach the clamp, and remove the 2 screws and actuator.
- Do not disassemble the actuator.
- Do not hold the actuator by the front end.